A Low Loft That Comes Apart

The Ylven loft bed is the twin size version of this low frame, built as four pieces that happen to stack rather than one fixed unit. A pine frame carries fourteen slats for a Twin mattress with no box spring, purchased separately, and full-length guardrails enclose the open sides of the deck with a three-rung ladder built into one end. Underneath, a desk on locking castors rolls out from the frame and pushes back in, its own shelf column travelling with it. A three-drawer chest on metal glides and a two-tier bookshelf fill the space beside it. None of the three is bolted to the frame. The deck sits low enough that the whole assembly reads as furniture rather than a structure.

FEATURES

• Rolling Desk on Castors pulls clear of the frame to work at and slides back underneath when the floor is needed, carrying its own two-compartment shelf column as it moves
• Three-Drawer Chest slides open on metal glides for folded clothes, supplies and everything that has no other drawer, standing free of the bed frame entirely
• Two-Tier Bookshelf spans one side in open compartments, holding books, bins and boxes at a height reachable without crouching
• Three Pieces That Stand Alone leaves the desk, the chest and the bookshelf unbolted from the frame, so all three carry on as furniture in the room after the bed itself is outgrown
• Low Deck Height keeps the sleeping surface close to the floor, low enough to make the bed from standing and to climb without a full ladder reach
• Fourteen-Slat Foundation spans the frame to hold a twin mattress directly, with no box spring required underneath
• Full-Length Guardrails enclose the open sides of the deck with a three-rung ladder built into the frame at one end
• Pine Frame Construction carries the deck in solid wood rather than tube steel, holding square under a twin mattress
• Small-Bedroom Footprint puts a bed, a desk, a chest and a bookshelf into the floor space of one, clearing a kids' room, small bedroom or guest room

Materials

• Bed Frame and Posts: Solid Pine
• Guardrails and Ladder: Solid Pine
• Slats: Solid Wood
• Chest and Bookshelf Panels: Engineered Wood
• Desktop and Shelf Panels: Engineered Wood
• Drawer Boxes and Fronts: Engineered Wood
• Drawer Slides: Metal
• Desk Castors: Metal with Locking Wheels
• Knobs: Wood
• Hardware: Metal

Care Instructions

• Dust the pine frame with a dry cloth, following the grain rather than working across it
• Wipe finished surfaces with a soft damp cloth and dry immediately so water does not sit on the finish
• Blot spills on the desktop as they happen rather than letting liquid sit along the panel edge
• Avoid abrasive powders, scouring pads, bleach and solvent-based cleaners on any wood surface
• Keep the frame away from radiators, heat vents and long hours of direct sunlight
• Clear grit from the drawer runners with a dry cloth so the drawers keep gliding smoothly
• Check the desk castors for hair and dust caught in the wheels, and lock them before working at the desk
• Retighten every frame bolt after the first two weeks of use, then check them every few months
• Lift the chest and bookshelf rather than dragging them when rearranging the room