A Futon With Winged Arms

The Wellington futon sofa bed is built around two arm panels that flare outward from the seat rather than rising straight from the frame. Each wing angles away at the top, widening the sofa across the shoulders and leaving a shallow pocket where a throw pillow settles against the seat. The back folds down in three positions, from an upright sitting angle through a mid recline to fully flat, and the wings drop along with it so the flat surface finishes level from end to end. Grid tufting draws the woven fabric into rows of rounded squares across the seat and the back, and four tapered legs angle outward beneath the frame to lift the body clear of the floor. Two matching throw pillows arrive with the sofa.

Features

• Outward-Flaring Winged Arms angle away from the seat at the top rather than standing upright, widening the sofa across the shoulders and framing a pocket at each end
• Three-Position Folding Back holds at an upright sitting angle, a mid recline, or fully flat, changing the sofa in place without pulling it away from the wall
• Wings That Drop With the Back lower alongside the backrest as it folds, finishing the flat surface level from one end to the other instead of leaving raised corners
• Grid-Tufted Woven Upholstery pulls the fabric into rows of rounded squares across the seat and back, breaking the wide panels into a consistent surface
• Two Matching Throw Pillows arrive with the sofa in the same upholstery, settling into the pocket at each wing in either position
• Foam Seat and Back Fill cushions both surfaces at an even depth so the seat and the folded-down back meet at one continuous plane
• Solid Wood Frame Core carries the seating structure beneath the upholstery, the build that holds the shape of a wide seat over daily use
• Tapered Angled Legs splay outward under the frame and lift the body clear of the floor, keeping the low silhouette from reading as a block on the ground
• Apartment-Friendly Footprint settles into studios, home offices and guest rooms where a full sofa and a separate bed would not both fit

Materials

• Upholstery: Woven Fabric
• Seat and Back Fill: Foam
• Frame Core: Solid Wood
• Frame Panels: Engineered Wood
• Legs: Molded Polymer
• Hardware: Metal

Care Instructions

• Vacuum the upholstery weekly with a soft brush attachment, drawing the brush in one direction across the surface
• Work the brush through the tufted squares, where dust settles faster than on the open panels
• Blot spills immediately with a clean dry cloth rather than rubbing them into the fabric
• Spot-clean with a cloth lightly dampened in a fabric-safe cleaner, testing on a hidden section first
• Fold the back down with a hand on each side rather than pressing on one corner
• Lift the throw pillows out before folding the back flat so they do not catch in the hinge
• Keep the upholstery out of prolonged direct sunlight and away from heat vents to preserve the surface over time
• Check the leg fixings and the folding hardware every few months, and keep the sofa on a level floor