A Gaming Chair With Three Stops

The Vesper gaming chair is the three-position version of this high-back racing seat, drawn so the backrest lands where it is put instead of drifting under weight. A side lever releases the back to 90, 105 and 135 degrees and holds it at each, and the armrests swing back in step with it so the forearms stay carried at all three. The backrest stands over two and a half feet above the seat with padded bolsters along both edges, a headrest pillow and a lumbar cushion hanging on separate straps that slide up or down to meet the neck and the small of the back. Under that, the seat pairs a pocket spring layer with padded foam so the cushion sinks and comes back rather than pressing flat, a padded footrest slides out from the front edge and pushes away again, and a gas lift over a five-star steel base sets the height and rolls the chair on quiet casters.

Features

• Three-Position Locking Recline stops the backrest at 90, 105 and 135 degrees rather than sliding on a friction lock, so the angle gets chosen instead of settled into
• Tilt-Linked Armrests swing back in step with the backrest instead of staying fixed to the seat, keeping the forearms carried at each of the three angles
• Adjustable Lumbar Cushion hangs on its own strap across the lower back and slides up or down to sit at the small of the back rather than wherever the chair decides
• High Racing Backrest stands over two and a half feet above the seat with padded bolsters along both edges to hold the body centred through hours at the screen
• Pull-Out Footrest slides from under the front edge to carry the legs during a recline, then pushes back under the seat before you stand up
• Adjustable Headrest Pillow slides up and down its own strap to meet the neck wherever the recline puts it, working separately from the lumbar cushion below
• 300-Pound Weight Capacity on a steel frame and a five-star steel base for confident everyday adult seating
• Pocket Spring Seat Cushion pairs a spring layer with padded foam so the seat sinks and comes back through a long session instead of pressing flat
• Desk and Bedroom Footprint fits a home office, a bedroom gaming corner, or a study nook that has to cover work hours and off hours on one chair

Materials

• Seat and Back Upholstery: PU Leather
• Seat Fill: Pocket Springs with Padded Foam
• Backrest and Cushion Fill: High-Density Foam
• Headrest Pillow and Lumbar Cushion: PU Leather with Adjustable Straps
• Internal Frame: Steel
• Footrest: Padded Steel Frame
• Height Adjustment: Gas Lift Cylinder
• Five-Star Base: Steel
• Casters: Dual-Wheel Casters
• Hardware: Metal

Care Instructions

• Wipe the PU leather with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth so moisture does not settle into the seams and stitching
• Avoid harsh chemicals, abrasive pads and solvent-based cleaners, which can dull or crack the PU leather
• Keep the chair out of prolonged direct sunlight and away from radiators and heat vents, which dry the upholstery
• Clear hair and grit from the caster wheels and the footrest track so both keep moving smoothly
• Retract the footrest and return the backrest upright before moving the chair
• Check the recline lever and the three lock positions periodically, and stop using the recline if a position no longer holds
• Wipe the steel base and the gas lift column with a soft dry cloth
• Check and retighten the base, armrest and backrest hardware every few months