Where Cane Meets Carved Solid Wood

The frame is cut entirely from solid wood, from the arched crown rail down through the fluted uprights to the tapered front legs, which is what gives the chair its weight in the hand and its steadiness once it is loaded. Set inside the shaped back surround is a woven cane panel, tilted back off vertical so the ergonomic curve of the frame meets your lower back with support rather than a flat upright edge, and open enough that air moves through the weave across a long dinner. The seat is built rather than simply padded, with S-shaped springs stretched beneath a high-resilience foam core so the cushion pushes back as you settle instead of compressing flat. Matte linen wraps the top in a dry, tight weave that shows texture instead of sheen, and glides under each foot let the pair slide back from the table quietly.

Features

• Solid Wood Frame runs through the crown rail, the fluted uprights and the tapered legs, giving each chair a density you feel the moment you lift one away from the table
• Ergonomic Cane Back tilts back off vertical so the shaped panel meets your lower back with steady lumbar support instead of a flat upright edge through a second course
• Breathable Open Cane Weave lets air move straight through the backrest while you sit, keeping the back cooler across a long meal than a fully upholstered panel would
• S-Spring and Foam Seat stretches serpentine steel springs beneath a high-resilience foam core so the cushion gives evenly and recovers its shape between meals
• Matte Linen Upholstery covers the boxed seat in a dry, tightly woven fabric offered in two colorways, leaning warm against oak or cool against gray-washed floors
• Fluted Carved Legs taper toward the floor with square block detailing repeated at every joint, carrying the same reeded language from the crown rail down to the foot
• Coordinated Set of Two ships as a matched pair, so a small table gets its full seating in one order without hunting down a second chair later
• Mid-Size Dining Room Ready at a standard dining seat height, sized for a four to six seat table without crowding the walkway behind the chairs

Materials

• Frame and Legs: Solid Wood
• Back Panel: Woven Cane Webbing
• Seat Upholstery: Matte Linen
• Seat Fill: High-Resilience Foam
• Seat Suspension: S-Shaped Steel Springs
• Floor Glides: Non-Slip Caps

Care Instructions

• Wipe the wood frame with a soft dry or slightly damp cloth, then dry it immediately
• Vacuum the linen seat regularly with a soft brush attachment to lift crumbs and dust out of the weave
• Blot spills right away with a clean white cloth, working from the outside of the mark inward, and let the seat air dry
• Spot-clean with a mild water-based upholstery cleaner, testing first on the underside of the seat
• Dust the cane panel with a soft brush or a vacuum brush head, since debris settles into the open weave
• Keep the cane away from prolonged direct sunlight and dry heat sources, which can make the weave brittle over time
• Do not soak the cane panel, and if dusting is not enough use a barely damp cloth and let it dry fully before use
• Avoid bleach, solvents and abrasive cleaners on both the wood frame and the linen seat
• Check and retighten the seat and leg hardware every few months, especially in a high-traffic dining room
• Lift the chairs rather than dragging them to protect the glides and the leg joints