A Two-Tone Dining Armchair That Wraps

The Saimaa dining armchairs arrive as a coordinated pair, each built around a contrast panel that splits the chair into two tones halfway up. The upper back, arms and seat are upholstered in one fabric, and a second tone in a different material takes over below the arm line, wrapping the lower back and continuing forward along both outer sides until it meets a strap fastened with a single stud. Vertical stitch lines divide that lower panel into parallel channels. Above it, the back rises and tapers slightly toward the top, seamed down the center, with low bolster arms rolling forward from either side. The seat is a deep box cushion piped around its front edge, set at a height that clears a standard dining table, and the arms sit low enough to pass under the table edge. Four tapered wood legs splay outward under the frame, capped where they meet the floor.

Features

• Two-Tone Contrast Panel wraps the lower back in a second material and carries forward along both sides, splitting each chair at the arm line instead of straight across the seat
• Strap and Stud Closure finishes the panel where it meets each arm, a small fastened tab that reads as hardware rather than sewn-on trim
• Vertical Channel Stitching divides the lower panel into parallel raised lines, giving the contrast section a ribbed surface against the plain upper back
• Seamed Tapered Backrest rises behind the shoulders and draws in toward the top, seamed down the center so the back reads finished from across the room
• Low Bolster Arms roll forward from either side at a height that slips under a standard dining table, so each chair pushes fully in between meals
• Deep Piped Seat Cushion sits thick over the frame with a corded edge tracing the front, holding its shape through long meals rather than settling into a dip
• Tapered Wood Legs splay outward under the frame and cap at each tip to meet hardwood, tile and laminate quietly
• 300-Pound Weight Capacity per chair carries adult seating through daily pulling in and pushing out at the table
• Coordinated Set of Two drops a matching pair into dining rooms, eat-in kitchens and living room corners in one purchase

Materials

• Main Upholstery: Woven Fabric
• Contrast Panel Upholstery: Chenille (yellow variant) or Faux Leather (brown variant)
• Seat Fill: Foam
• Frame: Solid Pine
• Back and Seat Shell: Plywood
• Legs: Solid Wood
• Panel Fastening: Strap with Metal Stud
• Floor Glides: Non-Slip Caps
• Hardware: Metal

Care Instructions

• Vacuum the main upholstery regularly with a soft brush attachment to lift dust before it settles into the weave
• Spot-clean the main upholstery with a cloth dampened in mild upholstery cleaner, blotting rather than rubbing
• For the chenille contrast panel, blot rather than rub so the pile is not flattened, then brush it back into direction once dry
• For the faux leather contrast panel, wipe with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth rather than letting moisture settle into the seam between the two sections
• Wipe the strap and stud with a dry cloth, taking care not to catch the upholstery edge alongside it
• Keep the chairs out of prolonged direct sunlight to preserve the upholstery across both variants
• Wipe the wood legs with a soft dry cloth, avoiding prolonged moisture
• Check and retighten the leg and frame hardware every few months to keep each chair steady