A Platform Bed Lit From Below

The Roros king platform bed is made for the bedroom that wants its lighting low and its furniture quiet. The fluted base, a row of vertical reeds with a wood-grain finish on all four sides, rests on a plinth set back from its edge, and an LED strip sits beneath it. Switch it on and the light pools on the floor around the bed, leaving the base looking as if it hovers. The color, brightness and effect change from the included remote or a phone app, from a steady warm glow for reading to slow color fades. Above, a wide fluted panel headboard stands on steel posts behind the mattress, extending past the base on each side. Thirteen steel slats carry a king mattress directly, so no box spring is needed.

Features

• Under-Bed LED Lighting with a strip set beneath the base that throws a soft glow across the floor, useful as a night light or evening mood lighting
• Remote and App Control for color, brightness and speed, with steady colors for reading and changing modes that can follow music for a movie or party night
• Floating Platform Look created by a plinth set back from the base edge, so the bed casts a shadow line by day and appears to hover once the lights are on
• Fluted on Every Side with vertical reeds in a wood-grain finish across the headboard and all four sides of the base, finished from every angle
• No Fabric to Clean on any part of the frame, so the panels wipe down with a damp cloth and give dust and pet hair nothing to cling to
• Wide Panel Headboard on steel posts that extends past the base on both sides, framing the pillows and leaving space for nightstands close by
• Steel Slat Foundation with thirteen steel slats that hold a king mattress directly, so no box spring or separate foundation is needed
• 1,000-Pound Weight Capacity for two sleepers and a king mattress together, carried by the steel frame and slats inside the fluted base
• Primary Suite Statement sized for a main bedroom where the bed is the centerpiece by day and the room’s softest light at night

Materials

• Panels: Engineered Wood with Fluted Wood-Grain Finish
• Wood-Grain Finish: Oak-Tone (oak variant) or Walnut-Tone (walnut variant)
• Frame, Headboard Posts and Slats: Steel
• Lighting: LED Strip with Plug-In Power Adapter
• Controls: Remote Control and App
• Hardware: Metal

Care Instructions

• Unplug the LED power adapter before cleaning the bed or moving it
• Keep the LED strip and power adapter dry, and do not let liquid reach the area beneath the base
• Route the power cord along the wall behind the bed so it is not pinched under the plinth or a nightstand
• Wipe the fluted panels with a soft, slightly damp cloth, then dry them
• Use a soft, dry brush to lift dust from the grooves between the reeds
• Do not let water stand on the panels or the base edge, since the engineered wood under the finish can swell if moisture gets in through a chip
• Avoid abrasive pads and harsh cleaners, which can wear the wood-grain finish
• Keep the bed out of long periods of direct sunlight to limit fading of the finish
• Use standard king sheets sized for 76" × 80"; California King sheets will not fit
• Check and tighten the frame bolts and headboard posts every few months
• The larger carton weighs close to one hundred pounds; carry it with two people and assemble the bed in the room where it will stay