A Gaming Chair That Tested the Base

The Rigel gaming chair is the certified version of this racing seat, built around the three parts a chair gets returned for. A BIFMA certified steel base spreads five arms under the seat, an SGS certified gas lift raises and lowers it, and the casters come off a ten thousand mile rolling test that keeps them turning without noise across hardwood and low pile carpet. Above that, the backrest tips to 90, 110 and 135 degrees on a side lever and holds at each, while the armrests swing back in step so the forearms stay carried at all three. A headrest pillow and a lumbar cushion hang on separate straps that slide up or down the back, quilted padding covers the seat and the backrest in PU leather that takes a damp cloth, and a padded footrest slides out from the front edge and pushes away again.

Features

• BIFMA Certified Steel Base carries the seat on five arms under a certification the base of a gaming chair rarely holds, backing the part that takes the whole load
• SGS Certified Gas Lift raises and lowers the seat through a four inch range on a cylinder that has been tested rather than only rated
• Adjustable Lumbar Cushion hangs on its own strap across the lower back and slides up or down to sit at the small of the back rather than wherever the chair decides
• Three-Angle Locking Recline stops the backrest at 90, 110 and 135 degrees and holds at each, upright for work, opened for a game, dropped back for a break
• Ten Thousand Mile Casters roll on wheels taken through a distance test, moving the chair across hardwood and low pile carpet without the grinding a worn caster makes
• Adjustable Headrest Pillow slides up and down its own strap to meet the neck wherever the recline puts it, working separately from the lumbar cushion below
• 300-Pound Weight Capacity on a steel frame and a five-star steel base for confident everyday adult seating
• Pull-Out Footrest slides from under the front edge to carry the legs during a recline, then pushes back under the seat before you stand up
• Desk and Bedroom Footprint fits a home office, a bedroom gaming corner, or a study nook that has to cover work hours and off hours on one chair

Materials

• Seat and Back Upholstery: Quilted PU Leather
• Seat and Back Fill: High-Density Foam
• Headrest Pillow and Lumbar Cushion: PU Leather with Adjustable Straps
• Internal Frame: Steel
• Footrest: Padded Steel Frame
• Height Adjustment: SGS Certified Gas Lift Cylinder
• Five-Star Base: BIFMA Certified Steel
• Casters: PU Dual-Wheel Casters
• Hardware: Metal

Care Instructions

• Wipe the PU leather with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth so moisture does not settle into the quilted seams
• Avoid harsh chemicals, abrasive pads and solvent-based cleaners, which can dull or crack the PU leather
• Keep the chair out of prolonged direct sunlight and away from radiators and heat vents, which dry the upholstery
• Clear hair and grit from the caster wheels and the footrest track so both keep moving smoothly
• Retract the footrest and return the backrest upright before moving the chair
• Check the recline lever and the three lock positions periodically, and stop using the recline if a position no longer holds
• Wipe the steel base and the gas lift column with a soft dry cloth
• Check and retighten the base, armrest and backrest hardware every few months