A Dining Chair Tufted All Over

The Prespa dining chairs arrive as a coordinated pair, each built around a shield-shaped back that draws in at the waist and widens at the shoulders. Fabric-covered buttons pull the velvet into a diamond grid across the face of the back, and the same grid continues onto the seat rather than stopping at the frame, dimpling the cushion across its full width and rolling over a rounded edge on every side. High-density foam sits under both surfaces so the tufting holds its depth. Behind the back panel the velvet is left smooth and traced by a single welted seam, set above the seat on solid wood posts that continue down into the floor as the rear legs. At the front, carved legs sweep out and scroll back in a traditional line under a pale weathered finish, and with no arms above them each chair tucks close under the table between meals.

Features

• Shield-Shaped Tufted Back draws in at the waist and widens at the shoulders, its diamond button grid pulling the velvet into padded squares across the full face of the panel
• Fully Tufted Seat carries the same button grid straight onto the cushion, a detail most dining chairs stop short of, so the seat reads finished from directly above
• Plush Velvet Upholstery wraps back and seat in a short dense pile that shifts tone as light crosses it, reading matte from one angle and lit from another
• High-Density Foam Fill sits under both the seat and the back panel so each dimple keeps its depth instead of flattening out across a long dinner
• Carved Cabriole Front Legs sweep outward and scroll back toward the floor in a traditional line that replaces the straight taper of a modern chair
• Continuous Rear Posts rise from the floor past the seat rim to carry the back panel, tying frame and backrest into one member on each side
• Weathered Wood Finish leaves the grain open and pale across every wood surface, a soft-worn look that lands vintage from the first day
• 275-Pound Seat Capacity per chair for confident everyday adult seating across the pair
• Armless Apartment Footprint keeps each chair narrow enough to tuck under the table and pull out without knocking the chair beside it

Materials

• Seat and Back Upholstery: Velvet
• Seat and Back Fill: High-Density Foam
• Tufting Buttons: Fabric-Covered
• Legs and Rear Posts: Solid Wood
• Wood Finish: Weathered
• Hardware: Metal

Care Instructions

• Vacuum the velvet weekly with a soft brush attachment, drawing along the direction of the pile so it lies even
• Work the brush into each tufted dimple, since the buttoned hollows collect dust faster than the flat panels
• Spot-clean marks with a cloth lightly dampened in mild upholstery cleaner, blotting rather than rubbing to protect the pile
• Test any cleaner on a hidden section of the seat first, and let the velvet dry fully before use
• Lift crushed pile by brushing gently across it once dry, and never press a hot iron to the fabric
• Keep the chairs out of prolonged direct sunlight to protect the upholstery and the wood finish
• Wipe the wood legs and rear posts with a soft dry cloth, avoiding prolonged moisture on the open grain
• Keep the chairs indoors, since the weathered finish and open grain are not sealed for outdoor exposure
• Check and retighten the leg and post hardware every few months to keep each chair steady