A Queen Bunk With Cabinets Built In

The Nyla bunk bed is the queen over queen version of this storage frame, drawn so the wall behind both beds carries cabinets rather than plain boarding. Solid pine posts stand at all four corners, joined into paneled headboards and side rails that carry fourteen slats above and seven below, so a queen mattress goes down without a box spring on either level. Six open cabinets fill the headboard wall at the lower bunk, divided into a mix of tall and short openings for books, folded bedding and the things a guest arrives with. Two AC outlets and two USB ports sit in the cabinet face within reach of the lower pillow. A built-in ladder climbs the end frame, and guardrails enclose the upper bunk along both long sides.

FEATURES

• Six Built-In Storage Cabinets fill the headboard wall behind the lower bunk in a mix of tall and short openings, so a guest room holds bedding, books and belongings without a dresser
• Bedside Charging Station sets two AC outlets and two USB ports into the cabinet face beside the lower pillow, so phones charge overnight from where they already rest
• 400 Pounds on Each Level rates both bunks for adult sleepers, so a guest room takes four grown visitors rather than reserving the top for whoever weighs least
• Two Queen Mattresses fill both levels, giving each pair the width of a standard queen instead of asking anyone to share a smaller bed
• Solid Pine Frame carries every post and rail in solid wood, holding square through the years a guest bed spends being climbed, stripped and made again
• Full-Length Top Guardrails enclose both long sides of the upper bunk along the whole sleeping surface rather than stopping partway toward the foot
• Paneled Headboards close in the head of each level in flat recessed panels, giving the frame the line of bedroom furniture rather than a climbing structure
• Built-In End Ladder climbs the frame on steps fixed into the structure, so nothing hooks over a rail or shifts sideways underfoot
• Guest Room Footprint fits four adult sleepers and their storage into the floor space of one queen bed, working in guest rooms, vacation houses and shared bedrooms

Materials

• Frame and Posts: Solid Pine
• Headboard Panels: Solid Pine
• Guardrails: Solid Pine
• Ladder: Solid Pine
• Storage Cabinets: Engineered Wood
• Slats: Plywood
• Hardware: Metal

Care Instructions

• Unplug the charging station at the wall before wiping the cabinets around it
• Keep drinks and any liquid away from the outlets and the USB ports
• Route the power cord clear of the ladder and the walkway, and do not pinch it behind the frame
• Dust the frame and cabinets with a dry cloth, following the grain rather than working across it
• Wipe finished surfaces with a soft damp cloth and dry immediately so water does not sit on the finish
• Avoid abrasive powders, scouring pads, bleach and solvent-based cleaners on any surface
• Keep the frame away from radiators, heat vents and long hours of direct sunlight
• Clear the cabinets before stripping the lower bunk so nothing gets knocked off during a change of sheets
• Check the slats every few months to make sure none has shifted out of position
• Retighten every frame bolt after the first two weeks of use, then check them every few months