A Platform Bed That Makes Room

The Marena king platform bed is made for the household where the cat or dog sleeps in the bedroom too. Instead of a solid footboard, the foot end opens into two arched cubbies, each about three feet wide and more than two feet deep, sized for a pet bed, a basket of throws or a row of storage bins. A dark arched panel frames each opening against the main finish, and an LED strip lights the inside so the open storage glows softly at night. Along one side, three drawers slide out for folded sheets, sweaters and spare pillows. Wood slats over center supports carry a king mattress with no box spring needed, and the frame has no headboard, so it stands under a window or against a plain wall.

Features

• Pet Nook at the Foot made from two open cubbies under the mattress, each sized for a pet bed so a cat or dog sleeps close by off the comforter
• Two Arched Open Cubbies each about three feet wide, more than two feet deep and well over a foot tall, also holding baskets, bins or folded throws
• Three Side Storage Drawers with wood drawer boxes on metal slides, set along one side for sheets, sweaters and spare pillows
• LED-Lit Open Storage with a strip inside the frame that lights both cubbies, giving the foot of the bed a soft glow at night for a pet or a trip across the room
• Two-Tone Arch Accent with a dark arched panel over each cubby, set against a white, natural or grey frame for a framed doorway look
• Headboard-Free Frame that stands under a window, against a bare wall or in front of a wall hanging without a panel behind the pillows
• Wood Slat Foundation over center supports, holding a king mattress directly so no box spring or separate foundation is needed
• 600-Pound Weight Capacity for two sleepers and a king mattress together, carried by the slatted platform, the center supports and the wood frame
• Pet Owner’s Primary Bedroom where one king bed covers sleeping, drawer storage and a spot for the cat or dog, without adding a dresser or pet bed stand

Materials

• Frame: Pine Wood and Engineered Wood
• Drawer Boxes: Pine Wood and Plywood
• Mattress Support: Wood Slats with Center Supports
• Arch Panels: Engineered Wood
• Lighting: LED Strip with Plug-In Power Adapter
• Drawer Slides: Metal
• Hardware: Metal

Care Instructions

• Use a king mattress no thicker than eight inches, as recommended for this frame
• Unplug the LED power adapter before cleaning the open storage or moving the bed
• Keep the LED strip and power cord dry, and route the cord where a pet cannot chew or pull it
• Shake out or vacuum pet beds and blankets in the cubbies regularly, and vacuum the cubby floors to lift fur and dust
• Wipe the frame, drawer fronts and cubbies with a soft, slightly damp cloth, then dry them right away
• Do not let water or pet accidents stand on the cubby floors, since the engineered wood can swell if moisture soaks in; wipe spills up promptly
• Avoid abrasive pads and harsh cleaners, which can wear the painted finish
• Use standard king sheets sized for 76" × 80"; California King sheets will not fit
• Check and tighten the frame bolts, slats and drawer slides every few months
• Each carton weighs over one hundred pounds; carry them with two people and assemble the bed in the room where it will stay