A Sofa Bed That Sits Low

The Langford pull-out sofa bed is built wide and low: eighty-two inches across the front, thirty-five inches to the top of the back, and a seat that sits closer to the floor than a standard sofa. The body divides into two side-by-side seat sections rather than one full-width panel, each sliding forward on its own steel base, and both together open a broad lounge surface with a narrow gap left down the center. Two padded back panels fold down behind the extended seats to complete the plane, or stay upright while the seats remain closed. Deep tufting draws the chenille into rounded pockets across the seats, backs and arms, and rolled pillow-top arms cap both ends at a width that carries an elbow or a head. A pull tab at the front of each section marks where to grip.

Features

• Eighty-Two-Inch Sofa Span stretches five inches wider than a standard two-seat sleeper, giving each cushioned section a broader seat without stepping up to a sectional footprint
• Low-Profile Silhouette keeps the back below three feet, holding sightlines open across a small living room where a tall sofa back would divide the space
• Split Pull-Out Seat Bases let each cushioned half slide forward on its own steel base, opening one section at a time or both together into a single lounge surface
• Fold-Down Back Panels drop from the upright sitting angle to lie behind the extended seats, closing the surface into one continuous tufted plane
• Steel Pull-Out Frame carries both extending seat bases beneath the upholstered body, rated to a 600-pound capacity across the sofa as a whole
• Deep-Tufted Chenille Upholstery pulls the woven pile into rounded pockets across the seats, backs and arms, keeping wide panels from reading flat over an eighty-two-inch span
• Rolled Pillow-Top Arms cap both ends at a width broad enough to rest an elbow against while sitting or a head against while stretched out
• Front Pull Tabs mark each extending section and give the hands a fixed grip for guiding a seat straight out from the frame
• Apartment-Friendly Two-Seat Footprint settles into living rooms, guest rooms and studios where a full sectional would close off the walkway

Materials

• Upholstery: Chenille
• Seat and Back Fill: Polyurethane Foam
• Inner Frame: Steel
• Pull-Out Seat Bases: Steel
• Leg Caps: Molded Polymer
• Hardware: Metal

Care Instructions

• Vacuum the chenille weekly with a soft brush attachment, drawing the brush in one direction along the pile
• Work the brush through the tufted pockets, where dust settles faster than on the open panels
• Blot spills immediately with a clean dry cloth rather than rubbing them into the pile
• Spot-clean with a cloth lightly dampened in a fabric-safe cleaner, testing on a hidden section first
• Clear dust, threads and small objects from beneath each seat section so the bases slide without catching
• Guide each seat section straight forward by its pull tab rather than dragging it sideways
• Fold the back panels down with a hand on each side rather than pressing on one corner
• Keep the chenille out of prolonged direct sunlight and away from heat vents to preserve the pile over time
• Check the accessible frame and pull-out hardware every few months, and keep the sofa on a level floor