A Dresser That Reads as One Carving

The Grenoble 6-drawer dresser is made for the bedroom wall that faces the bed, where the dresser is the first thing you see every morning. Its six drawer fronts share one carved ripple pattern. It starts as a tight spiral in the upper corner and widens into curved rings that cross every front, so the design only lines up when all six drawers are shut. There are no handles to break the pattern; each drawer opens from the gap along its edge and travels on metal side slides. The top and side panels are rounded at the front corners, a recessed plinth lifts the case off the floor, and the frame is solid fir with engineered wood panels and drawer fronts in a painted finish.

Features

• Carved Ripple Fronts with one pattern spreading from a spiral in the top corner across all six drawers, so the dresser reads as a single sculpted panel
• Handle-Free Drawer Fronts that open from the gap along each edge, keeping the carving uninterrupted and leaving nothing to snag a sleeve
• Six Wide Drawers with an interior close to nineteen inches across, roomy enough for folded sweaters, jeans, towels and spare bedding
• Metal Drawer Slides on every drawer that carry it out smoothly and keep it level as it fills with clothes and linens
• Rounded Top and Sides curved at the front corners, softening the outline and echoing the rings carved across the drawer fronts
• Recessed Plinth Base set back under the case, lifting the drawers off the floor and making the dresser look lighter from across the room
• Solid Fir Frame with engineered wood panels and drawer fronts, finished in a smooth painted surface that wipes clean with a soft cloth
• Anti-Tip Wall Brackets included at the top of the back panel, for fastening the dresser to the wall once it is in place
• Shallow Bedroom Footprint just under sixteen inches deep, fitting a smaller bedroom, a nursery wall or the space at the foot of a bed

Materials

• Frame: Solid Fir Wood
• Top, Side Panels and Drawer Fronts: Engineered Wood
• Finish: Paint
• Drawer Slides: Metal
• Anti-Tip Hardware: Metal Wall Brackets
• Hardware: Metal

Care Instructions

• Fasten the dresser to the wall with the included anti-tip brackets before filling the drawers
• Load the bottom drawers first and avoid opening more than one drawer at a time
• Wipe the painted surface with a soft, slightly damp cloth, then dry it
• Use a soft, dry brush to lift dust from inside the carved grooves
• Wipe up spills right away and do not let water stand on the top or in the grooves, since the engineered wood under the paint can swell if moisture gets through a chip
• Use coasters and place a mat under lamps or decor that could scratch the paint
• Avoid abrasive pads and harsh cleaners, which can dull the painted finish
• Keep the dresser out of long periods of direct sunlight to limit fading of the color
• Check and tighten the drawer slide screws every few months