A Storage Bed That Lifts Open

The Celia queen storage bed is made for the bedroom where the closet fills up long before the seasons change. Pull the strap at the foot and the slatted platform rises on two gas struts, hinged at the headboard, opening a storage base that covers almost the entire footprint of the mattress. Spare duvets, winter coats, luggage and extra pillows go below, out of sight. Above, the wingback headboard is tufted in a grid of padded squares, with side wings that wrap around the pillows and carry a line of textured oval accents down each edge. Chenille covers the headboard, rails and footboard, the plywood slats rest on a metal frame so no box spring is needed, and short solid wood legs carry the base.

Features

• Lift-Up Storage Base that opens nearly the full area under the mattress, with room for spare bedding, out-of-season clothes and luggage in one place
• Gas-Assisted Lift with two gas struts that help raise the slatted platform from the foot end and hold it open while you reach inside
• Pull Strap at the Foot of the platform, giving you a grip to raise and lower the mattress without lifting it by its edge
• Waffle Wingback Headboard in a grid of padded squares with side wings that frame the pillows, tall enough to sit up against while reading
• Soft Chenille Upholstery covering the headboard, side rails and footboard, with a matte, lightly ribbed texture that is soft under your hand
• Slats on Metal Frame with a center support rail, holding the mattress directly so no box spring or separate foundation is needed
• Solid Wood Round Legs set under each corner, lifting the storage base just off the floor and adding a warm wood detail below the chenille
• 500-Pound Weight Capacity for two sleepers and a queen mattress together, carried by the slatted lift platform, the metal frame and the center support rail
• Small Bedroom Storage for apartments and bedrooms with little closet space, where one bed can stand in for a dresser or a linen cupboard

Materials

• Upholstery: Chenille Fabric
• Padding: Foam
• Frame: Metal
• Mattress Support: Plywood Slats with Center Support Rail
• Lift Mechanism: Gas Struts
• Legs: Solid Wood

Care Instructions

• Place the mattress on the platform before using the lift; the gas struts are balanced for a mattress’s weight, and an empty platform can rise quickly
• Keep hands and items clear of the hinge and the storage edge when lowering the platform
• Pack stored items below the top of the side rails so the platform closes flat
• Vacuum the chenille with a soft brush attachment, working along the ribbed texture
• Spot clean with a damp cloth and a mild upholstery cleaner, blotting rather than rubbing, and test a hidden area first
• Brush the oval accents gently with a soft brush; do not pull loose loops, trim them level instead
• Keep the bed out of long periods of direct sunlight to limit fading
• Check and tighten the frame bolts and gas strut fittings every few months
• Rotate the mattress head to foot every few months so the slats carry it evenly
• Lift the frame rather than dragging it when moving