A Dining Chair Drawn Upright

The Ann dining chairs arrive as a coordinated pair, each built around a backrest that rises well past the shoulder blades and narrows toward the top. Evenly spaced stitch lines cross the back from side to side, drawing the padding into shallow ribs one above the next, and the same banding carries forward across the seat so both surfaces break into segments rather than reading as one flat expanse. Faux leather wraps the whole of it in a smooth surface that takes a damp cloth rather than holding crumbs in a weave, with the seat built over high-resilience foam on a molded panel and its front edge rolled under at the frame. Four powder-coated steel legs bolt straight to the underside and taper toward the floor with no stretcher or apron bridging them, leaving the space below entirely open.

Features

• Tapered High Back rises well above the shoulder blades and narrows toward the top, giving each chair a vertical line that fills out a table setting without widening the footprint below
• Ribbed Stitch Lines cross the backrest one above the next and carry forward across the seat, drawing the padding into shallow bands over both surfaces
• High-Resilience Foam Seat builds the cushion over a molded panel so it gives under weight and comes back instead of pressing flat through a long dinner
• Powder-Coated Steel Legs taper toward the floor in matte black, bolted straight to the underside of the seat with no stretcher or apron bridging them
• Open Frame Underneath leaves the space below the seat clear of crossbars, keeping sightlines open across a smaller dining room and the floor easy to sweep
• Wipe-Clean Faux Leather wraps the back and seat in one smooth surface that takes a damp cloth, so a spill at the table lifts off rather than settling into a weave
• Protective Floor Caps close off the base of each leg to keep hardwood, tile and laminate clear of scuffs when a chair gets pushed back from the table
• Coordinated Set of Two seats a two-person table in one purchase, or fills the two open places left at a table already partly furnished

Materials

• Upholstery: Faux Leather
• Seat Fill: High-Resilience Foam
• Seat Base: Molded Panel
• Frame and Legs: Powder-Coated Steel
• Floor Caps: Protective Plastic Caps
• Hardware: Metal Bolts and Fasteners

6 行 · 与姊妹款同行数同分行方式 ✓

Care Instructions

• Wipe the faux leather with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth rather than rubbing, and dry the surface fully afterward
• Draw a soft cloth along each stitch line on the back and seat, where crumbs and dust collect in the recessed seams
• Avoid bleach, solvents and abrasive pads, which can dull or lift the faux leather surface
• Keep the chairs out of prolonged direct sunlight, which can dry and stiffen the surface over time
• Wipe the powder-coated legs with a soft damp cloth and dry immediately to prevent water spotting
• Touch up any chip in the powder coating so the steel beneath is not left exposed to damp
• Check and retighten the leg bolts every few months, and keep the chairs on a level floor
• Keep the floor caps clear of grit, and lift rather than drag the chairs when repositioning