A Corner Desk That Rises

The Altis desk is built around a continuous L-shaped top and a three-column powered frame, so the corner of a room becomes one uninterrupted work surface instead of two separate tables pushed together at a seam. The desktop is engineered wood under a laminated surface that resists moisture and scratching, cut with grommets and a recessed outlet strip before it ships. Underneath, dual-stage telescoping columns in powder-coated steel raise and lower both wings in one motion, driven by a motor quiet enough to run through a call, while a digital keypad stores three working heights and locks out with a child lock setting. T-shaped feet spread the load wide across the floor, a cable channel runs the length of the frame, and two steel hooks mount under the edge for a bag or a headset.

FEATURES

• L-Shaped Corner Layout wraps two working wings around a corner, giving monitors one surface and everything that gets pushed aside a second, without a seam under the keyboard
• Full Sit-to-Stand Range travels from standard seated desk height to a full standing position, lifting both wings and everything on them together instead of one side at a time
• Quiet Lifting Motor raises the top steadily enough to change position mid-meeting, running low enough that a microphone across the desk will not pick it up
• Built-In Desktop Outlet sets sockets into the surface itself, so a laptop, a monitor and a phone charger stay plugged in no matter where the frame stops
• Three Memory Presets store your seated, standing and in-between heights on the keypad, returning to each one at a single press rather than nudging the arrows every time
• 200-Pound Steel Frame carries a full multi-monitor rig, a desktop tower and everything else that accumulates, without the top flexing as it climbs
• Child Lock Setting disables the keypad so a curious hand cannot send the desk travelling while nobody is sitting at it
• Two Under-Desk Hooks bolt beneath the edge to hang a backpack or a headset clear of the floor and off the working surface
• Home Office and Gaming Footprint claims a corner rather than a wall, sized for a full workday setup in a spare room, a den or a shared studio

Materials

• Desktop: Engineered Wood
• Frame and Columns: Powder-Coated Steel
• Lift System: Electric Motor with Dual-Stage Telescoping Columns
• Control Panel: Digital Keypad with LED Display
• Power Module: Embedded Outlet Strip with Cable Grommets
• Cable Management: Under-Desk Cable Clips
• Feet: T-Shaped Steel Bases with Floor Pads
• Hooks: Steel

Care Instructions

• Wipe the desktop with a soft damp cloth and a mild detergent, then dry it immediately with a clean cloth
• Blot spills as they happen rather than letting liquid sit around the grommets or the outlet strip
• Use a mouse pad and coasters to keep the laminated surface clear of repeated abrasion in one spot
• Avoid abrasive powders, scouring pads, bleach and solvent-based cleaners on the desktop
• Keep liquid away from the outlet strip, the keypad and the cable channel, and unplug the desk before cleaning around them
• Dust the steel columns and feet with a dry cloth, and keep the telescoping sections free of grit
• Clear the space under and behind the desk before raising or lowering it, and let cables run with slack rather than pulled taut
• Keep the load within the stated capacity and spread it across both wings rather than piling it over one column
• Check and retighten the frame and desktop hardware every few months
• Lift rather than drag the desk when repositioning it, and lower it fully first