A Loft Bed That Stacks Upward

The Ailinor loft bed is the full size version of this high loft frame, built so one wall run does the work of four separate pieces. A powder-coated steel frame lifts the sleep deck clear of the floor on square posts, full-length guardrails box in the platform at both long sides and both ends, and a slat deck holds a Full mattress with no box spring, purchased separately. Underneath, an L-shaped desktop extends the length of the frame and turns the corner, with an outlet and USB station set flush into the panel and an LED strip mounted beneath the deck above it. A wardrobe column with a hanging rod and an adjustable lower divider closes one end, and a staircase of wide flat treads climbs to the deck while doubling as open shelving, mounting on the left or the right. The upper deck is rated to 350 pounds.

FEATURES

• Full-Size Sleep Deck carries a full mattress on a steel slat platform, giving a single sleeper room to spread out rather than the width a twin loft frame leaves
• L-Shaped Under-Bed Desk extends the length of the frame and turns at the corner, holding a monitor, a laptop and open books at once without a second desk in the room
• Built-In Power Station sets an outlet and USB ports flush into the desktop, so a phone, a laptop and a lamp all plug in where you actually sit
• Remote-Controlled LED Strip mounts beneath the sleep deck and washes the desk in color or warm light, doubling as a low night light for the walk across the room
• Full-Height Hanging Wardrobe holds a hanging rod above an adjustable lower divider, taking shirts, jackets, folded bedding or shoes where a built-in closet runs short
• Reversible Storage Staircase climbs to the deck on wide flat treads that double as open shelves, and mounts on either the left or the right side of the frame
• Full-Length Guardrails enclose the perimeter of the sleep deck at both sides and both ends, keeping the mattress boxed in through the night
• 350-Pound Deck Capacity rates the upper platform for everyday adult sleeping rather than occasional guest-room duty
• Single-Wall Vertical Footprint stacks bed, desk, wardrobe and shelving into one wall run, clearing the floor of a teen bedroom, student apartment or spare room

Materials

• Frame, Posts and Guardrails: Steel
• Surface Finish: Powder-Coated
• Staircase: Steel
• Mattress Deck: Steel Slats
• Desktop and Shelf Panels: Engineered Wood Board
• Panel Surface Finish: Melamine
• Wardrobe Hanging Rod: Steel
• Power Station: Outlet and USB Ports
• Under-Deck Lighting: LED Strip with Remote
• Hardware: Metal

Care Instructions

• Unplug the power station and the LED strip at the wall before cleaning anything on or near the desktop
• Keep cups, bottles and cleaning sprays away from the outlet panel, and never wipe it with a wet cloth
• Route the power cord clear of the staircase and the walkway, and do not pinch it under a frame leg
• Wipe the steel frame with a soft damp cloth and dry it right away so water does not sit on the coating
• Wipe the desktop and shelf panels with a soft damp cloth and a mild detergent, then dry immediately
• Blot spills on the desktop as they happen rather than letting liquid sit along the panel edge
• Avoid abrasive powders, scouring pads, bleach and solvent-based cleaners on the frame and the panels
• Dust the LED strip with a dry cloth only, and keep the remote away from liquids
• Vacuum the wardrobe floor and wipe the hanging rod with a dry cloth to keep grit off the divider track
• Retighten every frame bolt after the first two weeks of use, then check them every few months