A Dining Chair Woven in Rope

The Aare dining chairs arrive as a coordinated pair, each built on a solid acacia frame with rope worked across two separate panels. The seat is a diamond mesh, the cords crossing in both directions and settling into a shallow dip toward the center as the weave takes weight. The back panel is worked differently: cords wrap horizontally across the opening and gather into a dense braid where the weave meets the wood, framing an open diamond field at the center. Between them, the acacia frame stays fully exposed, its grain reading clearly through a natural finish across the legs, the arms and the panel surrounds. The arms carry level from the rear post to the front leg at a height above a standard table edge, so these chairs draw back from the table rather than tucking under it.

Features

• Diamond-Woven Rope Seat crosses cords in both directions across the frame and settles into a shallow dip at the center as the weave takes weight through a meal
• Horizontally Wrapped Rope Back works the cords across the opening in a different pattern from the seat, gathering into a dense braid where the weave meets the wood
• Solid Acacia Frame builds the legs, arms and panel surrounds from natural hardwood, the grain reading clearly through a clear finish on every visible face
• Level Arm-to-Leg Frame carries each arm straight from the rear post to the top of the front leg, closing the side of the chair into a rectangle of wood and rope
• Open Weave Construction leaves both panels ventilated through the mesh rather than padded, keeping the seat and back light against the solid frame
• Squared Tapered Legs narrow toward the floor on four sides, holding the frame square beneath the woven panels
• Holds Steady to 400 Pounds per chair for confident everyday adult seating
• Arms Set Above Table Height draw the chairs back from the table edge rather than sliding them fully underneath it
• Coordinated Set of Two drops a matching pair into kitchens, dining rooms and apartment eating corners in one purchase

Materials

• Seat and Back Panels: Woven Rope
• Frame, Arms and Legs: Solid Acacia Wood
• Floor Glides: Non-Slip Caps
• Hardware: Metal

Care Instructions

• Use these chairs indoors only, since the rope and the clear-finished acacia are not treated for sustained outdoor exposure
• Dust the rope panels with a soft dry brush, working along the direction of the weave to lift debris from between the cords
• Vacuum the seat panel with a soft brush attachment to clear crumbs from the mesh openings
• Avoid wiping the rope with a damp cloth, since moisture drawn into the cords takes a long time to leave them
• Blot any spill on the rope immediately with a dry cloth and let the panel air out fully before use
• Wipe the acacia frame with a soft dry cloth, then apply a wood-safe polish a few times a year to protect the finish
• Avoid harsh chemicals and household cleaners on both the wood and the rope
• Keep the chairs out of prolonged direct sunlight to preserve the rope color and the wood finish
• Check the frame hardware every few months, particularly where the arms meet the front legs
• Lift rather than drag each chair when repositioning, and keep the floor glides clear of grit