A Tufted Panel Framed in Plain

The Douro dining chairs arrive as a coordinated set of four, each built on a tall parsons back that rises straight from the seat and rolls forward at the top edge. Covered buttons are drawn into the center of the back in a diamond grid, pulling the fabric into shallow folds between them, while a plain border carries around all four sides of that grid so the tufting reads as a panel set into the back rather than a treatment across it. Below, the seat is a squared cushion built over foam, its front edge rolled and its sides upholstered down to the frame. Four square solid wood legs in a light natural finish stand straight at the front and rake back at the rear, each closed off with a floor pad.

Features

• Center-Panel Diamond Tufting draws covered buttons into a diamond grid across the middle of the back while a plain border carries around all four sides, framing the pattern rather than filling the panel
• Rolled Top Edge turns the crown of the back forward in a soft roll, finishing the tall upright line without a hard cut across the top
• Tall Parsons Back rises straight from the seat with no gap between the two, giving the pair the upright formal line of a fully upholstered dining chair
• Squared Seat Cushion builds the seat over foam with a rolled front edge, holding its shape under daily pulling out and pushing in rather than settling into a dip
• Solid Wood Legs stand square and straight at the front and rake back at the rear, carrying the upholstered frame on timber rather than metal tubing
• Woven Upholstery wraps the back, the sides and the seat in one continuous fabric, its slubbed texture reading matte against the pale wood below
• Protective Floor Pads close off the base of each leg to keep hardwood, tile and laminate clear of scuffs when a chair gets pushed back from the table
• Coordinated Set of Four seats a standard four-seater in one purchase, sized to sit two chairs along each side of a table

Materials

• Back and Seat Upholstery: Woven Fabric
• Seat and Back Padding: High-Density Foam
• Frame: Solid Wood
• Legs: Solid Wood
• Tufting Buttons: Fabric-Covered
• Floor Pads: Protective Caps
• Hardware: Metal Bolts and Fasteners

Care Instructions

• Vacuum the woven upholstery regularly with a soft brush attachment to lift dust before it settles into the weave
• Work a soft brush around each tufting button to lift crumbs and dust out of the folds, where debris collects fastest on a tufted back
• Spot-clean marks with a cloth dampened in mild upholstery cleaner, blotting rather than rubbing
• Test any cleaner on a hidden section of the seat first, and let the fabric dry fully before use
• Draw a soft cloth along the rolled top edge and the seat rim, where the fabric turns and holds dust in the fold
• Keep the chairs out of prolonged direct sunlight to preserve the upholstery over time
• Wipe the solid wood legs with a soft dry cloth and keep them clear of prolonged moisture
• Keep the chairs indoors, since the finished wood frame is not made for covered porches, patios or garden rooms
• Check and retighten the leg bolts every few months to keep each chair steady
• Lift rather than drag the chairs when repositioning, and keep the floor pads clear of grit