A Wraparound Dining Chair With Arms

The Chelan dining chairs arrive as a coordinated pair, each built on a solid rubberwood frame that treats the back and both arms as one continuous curve. The frame sweeps down from the crown of the back to each arm end in an unbroken line, and twill upholstery fills the span between, padded across the inner face and carried around to the outer back so the chair reads finished from behind. A thick foam cushion sits within the wood seat surround below. Four tapered legs drop from that surround, tied together near the floor by a cross stretcher that locks the four into one rigid base. Plastic glides cap each foot for hardwood, tile and carpet.

Features

• Wraparound Wood Frame carries one length of rubberwood from arm end to arm end around the crown of the back, with no joint breaking the curve at either shoulder
• Enclosed Arm Support encircles the sitter on three sides at a height that meets the forearm naturally, giving the head of the table a chair with somewhere to rest
• Thick Seat Cushion pads the seat well past the shallow drop-in pads fitted to most wood dining chairs, holding its shape through long dinners rather than settling into a dip
• Twill Woven Upholstery wraps the inner back, the arms and the seat in a fine diagonal weave, carried around the outer back so no plain panel shows from behind
• Cross Stretcher Base ties all four legs together near the floor, holding the tapered stance square through years of pulling in and pushing out
• Solid Rubberwood Frame builds the wraparound curve, the seat surround and the legs from natural hardwood, carrying visible grain across every exposed face
• Holds Steady to 300 Pounds per chair for confident everyday adult seating across the pair
• Dining Room Armchair Footprint settles into farmhouse and mid-century dining rooms, at the head of a table or pulled aside as occasional seating

Materials

• Seat and Back Upholstery: Twill Polyester
• Arm Upholstery: Twill Polyester
• Seat Fill: High-Density Foam
• Frame and Arms: Solid Rubberwood
• Legs and Stretcher: Solid Rubberwood
• Floor Glides: Plastic
• Hardware: Metal

Care Instructions

• Vacuum the twill regularly with a soft brush attachment to lift dust before it settles into the weave
• Spot-clean marks with a cloth dampened in mild upholstery cleaner, blotting rather than rubbing to protect the woven surface
• Test any cleaner on a hidden section of the seat first, and let the fabric dry fully before use
• Blot spills as they happen rather than letting liquid settle along the seam where fabric meets wood
• Avoid soaking the upholstery, and keep the chairs out of prolonged direct sunlight to preserve the fabric over time
• Wipe the rubberwood frame, arms and legs with a soft dry cloth, avoiding prolonged moisture
• Apply a wood-safe polish a few times a year to protect the natural finish
• Check the stretcher and leg bolts every few months and retighten any that have worked loose
• Keep the floor glides clear of grit, and lift rather than drag the chairs when repositioning them