A Dining Chair That Turns in Place

The Atitlan dining chairs arrive as a coordinated pair, each built on a swivel plate set between the seat shell and the base. The shell turns a full circle above four tapered metal legs that splay outward from a central hub, keeping every foot planted while the sitter turns. Above that plate the shell curves up into a barrel back and forward at both sides into low arms, its face divided by vertical channel stitching that follows the curve from the top of the back down into the seat. Faux leather wraps the whole shell over foam, thickest across the seat where a curved cushion carries the weight. Non-slip caps close off each leg where it meets the floor.

Features

• 360° Swivel Seat turns the shell a full circle above a fixed base, so a sitter can face the table or the room without dragging the chair across the floor
• Four-Point Metal Base splays four tapered legs outward from a central hub, spreading the load of a turning seat wider than four legs set at the corners
• Barrel Back With Low Arms curves the shell up behind and forward at both sides, enclosing without the bulk of a full armchair frame
• Vertical Channel Stitching divides the face of the shell into narrow channels from the top of the back down into the seat, following the curve in one unbroken set of lines
• Faux Leather Upholstery wipes down with a damp cloth after a meal, taking the spills that settle permanently into a woven seat
• Curved Foam Seat Cushion dishes gently toward the center over thick foam, giving under weight and coming back rather than pressing flat
• Non-Slip Floor Caps close off each leg to grip hardwood, tile or laminate and keep a turning chair from creeping across the floor
• Coordinated Pair for Dining drops two matching swivel chairs into dining rooms, kitchen tables and desk corners in one purchase

Materials

• Shell Upholstery: Faux Leather
• Fill: High-Density Foam
• Base and Legs: Powder-Coated Steel
• Swivel Mechanism: Steel
• Floor Caps: Non-Slip Polymer
• Hardware: Metal

Care Instructions

• Wipe the faux leather with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth to keep moisture from settling into the channel seams
• Work a soft dry brush along each channel to lift crumbs from the base of the stitching
• Avoid harsh chemicals, abrasive pads and solvent-based cleaners on the faux leather, which can damage the surface
• Keep the chairs out of prolonged direct sunlight to preserve the upholstery over time
• Wipe the powder-coated base with a soft damp cloth, drying immediately to prevent water spotting
• Keep the swivel plate clear of grit and check that it turns freely without catching
• Check the floor caps and retighten the base hardware every few months to keep each chair steady
• Lift rather than drag the chairs when repositioning them