A Dining Chair Drawn Upright

The Ann dining chairs arrive as a coordinated set of four, each built around a backrest that rises well past the shoulder blades and narrows toward the top. Evenly spaced stitch lines cross the back from side to side, drawing the padding into shallow ribs one above the next, and the same banding carries forward across the seat so both surfaces break into segments rather than reading as one flat expanse. The seat itself is built over high-resilience foam on a molded panel, its front edge rolled under where it meets the frame. Four powder-coated steel legs bolt straight to the underside and taper toward the floor with no stretcher or apron bridging them, leaving the space beneath the seat entirely open. Protective caps close off each foot, and the armless frame keeps every chair narrow along a table edge.

Features

• Tapered High Back rises well above the shoulder blades and narrows toward the top, giving each chair a vertical line that fills out a table setting without widening the footprint below
• Ribbed Stitch Lines cross the backrest one above the next and carry forward across the seat, drawing the padding into shallow bands over both surfaces
• High-Resilience Foam Seat builds the cushion over a molded panel so it gives under weight and comes back instead of pressing flat through a long dinner
• Powder-Coated Steel Legs taper toward the floor in matte black, bolted straight to the underside of the seat with no stretcher or apron bridging them
• Open Frame Underneath leaves the space below the seat clear of crossbars, keeping sightlines open across a smaller dining room and the floor easy to sweep
• Upholstery Across Four Variants wraps the back and seat in one continuous surface, offered in a woven fabric or a smooth wipe-clean faux leather, two colorways in each
• Protective Floor Caps close off the base of each leg to keep hardwood, tile and laminate clear of scuffs when a chair gets pushed back from the table
• Coordinated Set of Four seats a full household in one purchase, sized to sit two chairs along each side of a standard four-seater table

Materials

• Upholstery: Woven Fabric (grey and brown variants) or Faux Leather (red and black variants)or Faux Suede (suede brown variants)
• Seat Fill: High-Resilience Foam
• Seat Base: Molded Panel
• Frame and Legs: Powder-Coated Steel
• Floor Caps: Protective Plastic Caps
• Hardware: Metal Bolts and Fasteners

Care Instructions

• For the woven fabric variants, vacuum regularly with a soft brush attachment to lift dust before it settles into the weave
• For the faux leather variants, wipe with a soft damp cloth and a leather-safe cleaner, testing on a hidden area first
• Blot spills promptly with a clean dry cloth rather than rubbing, and dry the surface fully afterward
• Draw a soft cloth along each stitch line on the back and seat, where crumbs and dust collect in the recessed seams
• Test any cleaner on a hidden section of the seat first, and avoid bleach and abrasive pads on either upholstery
• Keep the chairs out of prolonged direct sunlight to preserve the upholstery across all four variants
• Wipe the powder-coated legs with a soft damp cloth and dry immediately to prevent water spotting
• Touch up any chip in the powder coating so the steel beneath is not left exposed to damp
• Check and retighten the leg bolts every few months, and keep the chairs on a level floor
• Keep the floor caps clear of grit, and lift rather than drag the chairs when repositioning